MacBook Air 安裝 Win 7 鍵盤 滑鼠沒反應

OS X 10.8.5
Boot Camp 5.0.4(473)

安裝方式參考網址：
http://supera198.blogspot.tw/2013/07/2013-macbook-air-bootcamp.html

若找不到 BootCamp\Drivers\Intel\Chipset\WIN7 驅動可到 Intel 下載：
https://downloadcenter.intel.com/product/65855/Intel-USB-3-0-eXtensible-Host-Controller-Driver

解壓縮後
找出以下 12 個必需的驅動檔案，放在 BootCamp\Drivers\Intel\Chipset\WIN7 和下列位置

$WinPEDriver$\IntelxHCISetup\Drivers\HCSwitch\Win7\x64\iusb3hcs.cat
$WinPEDriver$\IntelxHCISetup\Drivers\HCSwitch\Win7\x64\iusb3hcs.inf
$WinPEDriver$\IntelxHCISetup\Drivers\HCSwitch\Win7\x64\iusb3hcs.sys
$WinPEDriver$\IntelxHCISetup\Drivers\HCSwitch\Win7\x64\WdfCoInstaller01009.dll
$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3hub.cat
$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3hub.inf
$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\IUsb3Hub.man
$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3hub.sys
$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3xhc.cat
$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3xhc.inf
$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3xhc.man
$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3xhc.sys

以上方式還不行的話，可參考把 USB 安裝碟，打包 USB3.0 驅動至 USB 裡
http://www.macx.cn/thread-2098963-1-1.html


@echo off title Windows 7 驱动加载程序 v1.3 ver | find "4.0." > NUL && set WOS=Windows 95 ver | find "4.1." > NUL && set WOS=Windows 98 ver | find "4.9." > NUL && set WOS=Windows ME ver | find "5.0." > NUL && set WOS=Windows 2000 ver | find "5.1." > NUL && set WOS=Windows xp ver | find "5.2." > NUL && set WOS=Windows 2003 ver | find "6.0." > NUL && set WOS=Windows vista ver | find "6.1." > NUL && set WOS=Windows 7 ver | find "6.2." > NUL && set WOS=Windows 8 ver | find "6.3." > NUL && set WOS=Windows 8.1 echo ---------------------------------------------------------------- echo 欢迎使用Windows 7 USB3.0 驱动加载程序 echo 本程序可以有效的解决在Macbook Air 2013年中期版本中用BootCamp安装 echo Windows 7时出现的键盘鼠标失灵的问题。 echo 正在自我检查... @echo users test>%windir%\tester.tmp||set users=0 if "%users%"=="0" ( echo 请以管理员身份运行该程序！&echo 方法：右键点击我，选择“以管理员权限运行” ) else ( del %windir%\tester.tmp&echo 用户权限检查正常。) set osok=0 if "%WOS%"=="Windows 7" set osok=1 if "%WOS%"=="Windows 8" set osok=1 if "%WOS%"=="Windows 8.1" set osok=1 if "%osok%"=="1" ( echo 系统版本检查正常：%WOS% ) else ( echo 系统版本不合要求，本程序要求在Windows 7或Windows 8中运行，而你的 echo 系统版本是 %WOS%。 set users=0 ) echo 千万注意，本程序不可以在可移动磁盘中运行，只能在本地磁盘中运行。 set voice=欢迎进入 Windows 7 驱动加载程序 echo ---------------------------------------------------------------- cd /d %~dp0 pause if "%users%"=="0" exit if "%osok%"=="0" exit cls echo ---------------------------------------------------------------- :inputc set /p desk=请输入U盘启动盘盘符[示例：e(小写，不带":"和"\")] echo 正在自我检查... set desktf=0 for %%i in (%desk%) do if exist %%i:\sources\boot.wim ( set desktf=1 ) else ( set desktf=0 ) for %%i in (%desk%) do if exist %%i:\sources\install.wim ( set desktf=1 ) else ( set desktf=0 ) if "%desktf%"=="1" for %%i in (%desk%) do if exist %%i:\$WinPEDriver$ ( set desktf=1 ) else ( set desktf=2 ) if "%desktf%"=="2" echo 该盘中无BootCamp支持文件，请检查是否用BootCamp加载了支持文件。&pause&goto inputc if "%desktf%"=="1" echo 自我检查正常！ if "%desktf%"=="0" echo 不存在此盘符或此盘符不是标准的Windows 7安装磁盘。 if "%desktf%"=="0" goto inputc echo ---------------------------------------------------------------- pause cls :sc :input cls echo ---------------------------------------------------------------- echo 请选择你要进行的任务： echo 1、复制U盘中的驱动到工作目录 echo 2、复制U盘中要加载驱动的镜像到工作目录 echo 3、给boot.wim加载驱动 echo 4、给install.wim加载驱动 echo 5、复制工作目录中的已经加载好驱动的镜像到U盘 echo 6、退出程序 echo ---------------------------------------------------------------- set /p task=任务编号(1~6): cls if "%task%"=="1" goto copy3 if "%task%"=="2" goto copy1 if "%task%"=="3" goto boot if "%task%"=="4" goto install if "%task%"=="5" goto copy2 if "%task%"==“6” exit :copy1 echo ---------------------------------------------------------------- echo 正在拷贝Windows安装镜像到工作目录... for %%i in (%desk%) do copy %%i:\sources\boot.wim %~dp0 for %%i in (%desk%) do copy %%i:\sources\install.wim %~dp0 echo 拷贝成功！ echo ---------------------------------------------------------------- pause set sendcode=拷贝Windows安装镜像到工作目录，2 set voice=拷贝Windows安装镜像到工作目录已完成 goto sc :copy2 echo ---------------------------------------------------------------- echo 正在进行自我检查.. if not exist boot.wim goto exit1 if not exist install.wim goto exit1 echo 存在Windows安装文件。 echo 自我检查完毕！不存在任何问题！ echo 正在拷贝Windows安装镜像到U盘启动盘... for %%i in (%desk%) do copy /y %~dp0install.wim %%i:\sources for %%i in (%desk%) do copy /y %~dp0boot.wim %%i:\sources del /q install.wim del /q boot.wim rd /q/s Drivers echo 正在删除限制文件... for %%i in (%desk%) do del %%i:\sources\ei.cfg echo 删除完成，已经可以自由选择系统版本。 echo 拷贝成功！ echo ---------------------------------------------------------------- set sendcode=拷贝Windows安装镜像到U盘启动盘，5 set voice=拷贝Windows安装镜像到优盘启动盘已完成 pause goto sc :copy3 echo ---------------------------------------------------------------- echo 正在复制U盘中的BootCamp支持文件到工作目录... md Drivers for %%i in (%desk%) do copy %%i:\$WinPEDriver$\IntelxHCISetup\Drivers\HCSwitch\Win7\x64\iusb3hcs.cat %~dp0Drivers for %%i in (%desk%) do copy %%i:\$WinPEDriver$\IntelxHCISetup\Drivers\HCSwitch\Win7\x64\iusb3hcs.inf %~dp0Drivers for %%i in (%desk%) do copy %%i:\$WinPEDriver$\IntelxHCISetup\Drivers\HCSwitch\Win7\x64\iusb3hcs.sys %~dp0Drivers for %%i in (%desk%) do copy %%i:\$WinPEDriver$\IntelxHCISetup\Drivers\HCSwitch\Win7\x64\WdfCoInstaller01009.dll %~dp0Drivers for %%i in (%desk%) do copy %%i:\$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3hub.cat %~dp0Drivers for %%i in (%desk%) do copy %%i:\$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3hub.inf %~dp0Drivers for %%i in (%desk%) do copy %%i:\$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\IUsb3Hub.man %~dp0Drivers for %%i in (%desk%) do copy %%i:\$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3hub.sys %~dp0Drivers for %%i in (%desk%) do copy %%i:\$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3xhc.cat %~dp0Drivers for %%i in (%desk%) do copy %%i:\$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3xhc.inf %~dp0Drivers for %%i in (%desk%) do copy %%i:\$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3xhc.man %~dp0Drivers for %%i in (%desk%) do copy %%i:\$WinPEDriver$\IntelxHCISetup\Drivers\xHCI\Win7\x64\iusb3xhc.sys %~dp0Drivers echo 成功复制所有BootCamp支持文件。 echo ----------------------------------------------------------------- set sendcode=拷贝驱动到工作目录，1 set voice=拷贝驱动到工作目录已完成 pause goto sc :boot echo ---------------------------------------------------------------- echo 正在进行自我检查.. if not exist boot.wim goto exit1 echo 存在Windows安装文件。 if exist Drivers\iusb3hcs.inf echo 存在BootCamp支持文件 if not exist Drivers\iusb3hcs.inf echo 不存在BootCamp支持文件&echo 即将开始执行BootCamp支持文件复制程序&pause&goto copy3 echo 自我检查完毕！不存在任何问题！即将开始加载驱动程序。 echo ---------------------------------------------------------------- echo 开始加载boot.wim的驱动程序... md mount dism /mount-wim /wimfile:boot.wim /index:2 /mountdir:mount dism /image:mount /add-driver /driver:Drivers\iusb3hub.inf dism /image:mount /add-driver /driver:Drivers\iusb3xhc.inf dism /image:mount /add-driver /driver:Drivers\iusb3hcs.inf dism /unmount-wim /mountdir:mount /commit echo boot.wim的驱动程序已经加载完毕。 del /q mount set sendcode=加载boot.wim的驱动，3 set voice=已成功加载boot.wim的驱动 rd /q/s mount pause goto sc :install md mount echo ---------------------------------------------------------------- echo 正在进行自我检查.. if not exist install.wim goto exit1 echo 存在Windows安装文件。 if exist Drivers\iusb3hcs.inf echo 存在BootCamp支持文件 if not exist Drivers\iusb3hcs.inf goto exit2 echo 自我检查完毕！不存在任何问题！即将开始加载驱动程序。 echo ---------------------------------------------------------------- echo 开始加载install.wim的驱动程序... dism /mount-wim /wimfile:install.wim /index:4 /mountdir:mount dism /image:mount /add-driver /driver:Drivers\iusb3hub.inf dism /image:mount /add-driver /driver:Drivers\iusb3xhc.inf dism /image:mount /add-driver /driver:Drivers\iusb3hcs.inf dism /unmount-wim /mountdir:mount /commit del /q mount echo install.wim的驱动程序已经加载完毕。 set sendcode=加载install.wim的驱动，4 set voice=已经成功加载install.wim的驱动 rd /q/s mount pause goto sc :help echo ---------------------------------------------------------------- echo 使用帮助 echo 工作原理：由于键鼠失灵的情况是因为没有驱动程序支持，而键盘鼠 echo 标是通过USB3.0接口与Mac交流，所以只要加载USB3.0的驱动程序即可规避 echo 这一问题。 echo 使用说明：顺序执行1~5项目即可。 echo 版本：1,3,0,0 echo 版权信息：一切版权归第8题选C所有。任何人未经许可不得进行反编译 echo 、修改、违规操作等。 echo ---------------------------------------------------------------- pause goto input :exit1 echo 不存在Windows安装镜像，请检查是否运行了复制程序。 echo 即将开始运行复制程序... pause goto copy1

WAMP 2.5 install SAPRFC

Apache Version : 2.4.9
PHP Version : 5.5.12
Apache/2.4.9 (Win32)

1) Extract zip file saprfc-$VERSION$-$PHP_VERSION$.zip

2) Copy php_saprfc_PHP5.5_x86_ts.dll to your extensions directory (e.g. D:\wamp\bin\php\php5.5.12\)

3) Edit php.ini file (in windows system dircetory, e.g. D:\wamp\bin\apache\apache2.4.9\bin\) and add line: 'extension=php_saprfc_PHP5.5_x86_ts.dll'

4) Copy librfc32.dll (from SAPGUI install CD) to the windows system
     directory or simple install SAPGUI on your machine.

Windows 清除 DNS 暫存 Cache

C:\>ipconfig  /flushdns

Windows IP 設定

成功清除 DNS 解讀器快取。

FortiClinet 關閉自動啟動服務

How to stop FortiClient from starting automatically?

1.Shut down FortiClient from the system tray.
2.Run net stop fortishield on command prompt.
3.Run services.msc on command prompt
4.Look for FortiClient Service Scheduler. Switch Startup type to Manual.
5.Restart your computer.

參考來源：http://www.hongjun.sg/2014/12/how-to-stop-forticlient-from-starting.html